進料條件 & 產品
*進料大小:直徑15mm以下
*物料硬度:莫氏硬度6以下 (6以上需特殊設計)
*石英含量:5%以下
*產品細度範圍:d97=10~50μm (1340~325 mesh)
*含水量:5%以下
Feed requirement & Products
*Inlet size: Under Dia.15mm
*Hardness: Under Mohs 6(special design for Above 6)
*Quartz Content: Under 5%
*Product size range: d97=10~50μm (1340~325 mesh)
*Moisture content: Under 5%
．原料應用種類
■碳酸鈣鹽
石灰石 大理石 方解石 白雲石
■水泥材料
長石 石英 陶瓷黏土
■工業用礦石
重晶石 火山黏土 煤炭 焦炭 石墨 石膏 磷酸鹽石 熟石灰石 滑石 沸石
．Material application
■Calcium carbonate
Limestone Marble Calcite Dolomite
■Ceramic Materials
Feldspar Quartz Kaolin clay
■Industrial Minerals
Barite Bentonite Coal Cokes Graphite Gypsum Rock phosphate Slaked lime Talc Zeolite
| 申川豎磨機特點■產品比表面積在23000cm2/g以下不須經過二次分級設備，可直接從豎磨機生產 ■磨盤與滾輪外部耐磨板為高磨耗性高鉻合金鋼，給客戶提供**的品質 ■根據使用者經驗在磨碳酸鈣有５年不用換滾輪與磨盤記錄，對節省成本與維修有優勢SVRM Feature■Under S.A=23000cm2/g products is no need 2nd classifying equipment to classify. It could be produced directly from SVRM ■Grinding liners is made on high wear resistant with high chrome alloy for disk and rollers to provide high quality to customer. ■Without changing wearing of rollers & disk in 5 years for grinding limestone on user experience record that would be an advantage on cost & fix |
