粉体行业在线展览
粉体行业在线展览
直接联系
上海实维实验仪器技术有限公司
上海
面议
285
1， About Thermo Sorvall™ ST 8R Small Benchtop Centrifuge
Meet clinical and research protocol needs with the Thermo Scientific™ Sorvall™ ST 8R small benchtop centrifuge series—now available in both ventilated and refrigerated models. These centrifuges provide exceptional capacity in a compact design with a smart， simple interface and the flexibility to support numerous applications.
2， Specifications
Environmental Conditions | Use in interior spaces Altitudes of up to 3000 m above sea level Max. relative humidity 80% up to 31 °C; decreasing linearly to 50% relative humidity at 40 °C |
Environmental Conditions during Storage and Shipping | Temperature: -10 °C to +50 °C Humidity: 15% to 85% |
Permissible Ambient Temperature during Operation | +2 °C to +35 °C |
Heat Dissipation | 100 V， 50 / 60 Hz 120 V， 60 Hz 230 V， 50 / 60 H 0.35 kWh/h; 1170 Btu/h 0.35 kWh/h; 1170 0.35 kWh/h; 1170 1140 kJ/h Btu/h; 1140 kJ/h Btu/h; 1140 kJ/h |
Overvoltage Category | II |
Pollution Degree | 2 |
IP | 20 |
Running Time | 99 h 59 min 50 sec， hold |
Maximum Speed nmax | 17850 rpm |
Minimum Speed nmin | 300 rpm |
Maximum RCF Value at nmax | 30279 x g |
Noise Level at Maximum Speed | < 56 dB |
Maximum Kinetic Energy | 10.1 kJ |
Temperature Setting Range | -10 °C to +40 °C |
Height (open door / closed door) | 700 mm / 320 mm |
Width | 460 mm |
Depth | 670 mm |
Weight | 74 kg |
3， Mains Supply
The following table contains an overview of the electrical connection data. This data is to be taken into consideration， when selecting the mains connection socket.
Unit | Sorvall ST 8R |
Article No. | 75007205 75007203 75007204 |
Mains Voltage | 100 V 120 V 230 V |
Frequency | 50 / 60 Hz 60 Hz 50 / 60 Hz |
Rated Current | 10 A 8 A 4 A |
Power Consumption | 850 W 700 W 750 W |
Equipment Fuse | 15 AT 15 AT 15 AT |
Building Fuse | 15 AT 15 AT 16 AT |
4， Rotor Selection
The Thermo Scientific Sorvall ST 8R Centrifuge is supplied without a rotor. Various rotors are available. If not stated otherwise the rotors can be used in the Thermo Scientific Sorvall ST 8 centrifuge as also in the Thermo Scientific Sorvall ST 8R centrifuge.
Part No. | Thermo Scientific Rotors |
75005701 | TX-150 swinging bucket rotor |
75005702 | TX-150 round buckets |
75005703 | TX-150 50mL conical buckets |
75005704 | TX100S clinical swinging bucket rotor with sealed carriers |
75005705 | TX100 clinical swinging bucket rotor with carriers |
75005706 | M10 microplate swinging bucket rotor |
75005723 | M10 buckets |
75005721 | M10 sealed buckets |
75005600 | MT12 microtube swinging bucket rotor |
75005709 | HIGHConic III fixed angle rotor |
75003623 | CLINIConic fixed angle rotor |
75005715 | MicroClick 24x2 microtube rotor |
75005719 | MicroClick 30x2 microtube rotor |
75005720 | 8x8 PCR Strip rotor |
75005733 | Hematocrit rotor |
75003694 | 8 x 50 mL Individually Sealed rotor |
75005765 | MicroClick 18x5 microtube rotor |
