Standard models and available pump laser power matrix

TiF-100ST (standard wavelength range)

TiF-100LW (extended IR range)

Pump laser power

Wavelength tuning

Output power

Wavelength tuning

Output power

3 W

740-860 nm

>350 mW аt 800 nm

n/a

n/a

4 W

735-870 nm

>500 mW аt 800 nm

n/a

n/a

5 W

730-875 nm

>650 mW аt 800 nm

830-950 nm

>200 mW at 950 nm

6 W

725-880 nm

>850 mW аt 800 nm

830-960 nm

>200 mW at 960 nm

8 W

720-885 nm

>1.25 W аt 800 nm

830-970 nm

>200 mW at 970 nm

10 W

715-890 nm

>1.55 W аt 800 nm

830-980 nm

>150 mW at 980 nm

It is possible to combine both ranges in a single laser system， please enquire for details.

General optical specifications

Output pulse duration¹⁾

<100 fs

Spectrum width¹⁾ (FWHM)

>8 nm

Pulse repetition rate (fixed)

80±10 MHz

Pump laser

integrated or stand-alone DPSS 532 nm low-noise laser (up to 10 W)

Beam mode

TEMoo (M^2 <1.2)

Beam diameter (at 1/e^2)

<2 mm

Output polarization

linear， horizontal， PER >20 dB

Beam divergence

<1 mrad

Long-term stability²⁾

<0.1% rms

Noise³⁾

<0.2% rms

Physical dimensions (L × W × H)

Laser head

516 × 350 × 118 mm (including integrated pump laser)

Pump laser control unit

353 × 360 × 119 mm

Closed-loop chiller

430 × 340 × 190 mm

Environmental and utility specifications

Operating temperature

15-30 °C

Relative humidity

<60%， non-condensing

Voltage

single-phase; 100-240 VAC; 50/60 Hz

Power consumption

<2 kW

Available configuration packages⁴⁾

Thermally stabilized monolithic body

included in any package

Pulse train SMA output with mode-lock LED

included in any package

“Auto” factory package

- built-in spectrometer

- single-touch wavelength tuning w. presets

- built-in power meter

- active output power stability locking

- Windows software with configurable widgets

- automatic mode-lock start and monitoring

PC requirements: USB 2.0 port， Windows 10

"Basic" factory package (default)

- push-button starter

- USB 2.0 wavelength tuning via step-motor slit (via step number information and calibration)

PC requirements: USB 2.0 port， Windows 10

“Manual” factory package

- push-button starter

- manual wavelength tuning slit

1) - when tuned to 800 nm central wavelength;

2) - after 30 min warm-up with cold start， during 12-hour continuous operation under equal room temperature conditions using recommended stabilized closed-loop chiller with proper capacity and recommended low-noise on-board integrated highly stable pump laserwith active power locking;

3) - measured from 10 Hz to 10 MHz;

4) - please select one of the packages for your system; certain features may be tailored or combined differently according to specific customer requirements.